XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
'11 Oversteer https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=11009 |
Page 1 of 1 |
Author: | Marek Gadomski [ Mon Dec 20, 2010 20:00:40 ] |
Post subject: | '11 Oversteer |
Hi Last competition i had big problems with oversteer at corner entry. my set please help, it was my first competition with new T3'11. thanks |
Author: | Skiddins [ Mon Dec 20, 2010 23:56:19 ] |
Post subject: | Re: '11 Oversteer |
4mm on rear camber link instead of 2mm Thicker oil all round. 1.4mm front roll bar, no rear or 1.2mm Skiddins |
Author: | Gary Lanzer [ Tue Dec 21, 2010 07:33:08 ] |
Post subject: | Re: '11 Oversteer |
What Skiddins said, also -1.5 front camber and -3 rear camber. |
Author: | m prigmore [ Tue Dec 21, 2010 16:04:23 ] |
Post subject: | Re: '11 Oversteer |
hi, I'm having the same problem but the car also slightly under steers to much on power any input would be highly appreciated. xform/index.php?act=view&ID=124&setup=t3_2011 |
Author: | Marek Gadomski [ Tue Dec 21, 2010 17:26:40 ] |
Post subject: | Re: '11 Oversteer |
thanks for all |
Author: | Reuben Manning [ Tue Dec 21, 2010 19:29:59 ] |
Post subject: | Re: '11 Oversteer |
Author: | m prigmore [ Wed Dec 22, 2010 00:06:56 ] |
Post subject: | Re: '11 Oversteer |
Author: | Skiddins [ Wed Dec 22, 2010 00:28:37 ] |
Post subject: | Re: '11 Oversteer |
Author: | m prigmore [ Tue Dec 28, 2010 17:45:25 ] |
Post subject: | Re: '11 Oversteer |
many thanks reuben and skiddins |
Author: | m prigmore [ Wed Dec 29, 2010 21:33:46 ] |
Post subject: | Re: '11 Oversteer |
hit the track track today and found, that the front belt was slipping when braking and lock the rear tyres when turning left and spinning the car around like when running a oneway. raised roll center on front hubs by 0.5mm which help and widen the front track by 0.75 with shims on the wheel hex also help make the car feel settle after the apex. could do with some more steering on power after apex. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |