| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Bit more off power grip https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=10964 |
Page 1 of 1 |
| Author: | DarrenOakley [ Mon Nov 29, 2010 18:33:03 ] |
| Post subject: | Bit more off power grip |
Used the T3 011 for the first time last week and happy with the kit set up so far. Just one thing that I might need to find would be off power rear grip. This could be down to my style or track conditions. If I find I do need more, would harder front sway bar be the best option to start with (say 1.5/1.6 ) or harder springs on the front. Or should I concentrate on the rear first. I have the dual servo top deck posts in at the moment. As I say this is only a maybe at the moment. Just moved over from another make and it initially feels as good out of the box as my last car did after months of work. Also probablly doesn't help I usually run 12th scale so everything feels loose for the first few runs |
|
| Author: | Gary Lanzer [ Mon Nov 29, 2010 20:40:10 ] |
| Post subject: | Re: Bit more off power grip |
| Author: | DarrenOakley [ Mon Nov 29, 2010 21:20:38 ] |
| Post subject: | Re: Bit more off power grip |
Ok i am running 3.0 xray springs up front with the 1.4 sway bar and 2.6 rear with the 1.2 sway bar. Cheers for the reply |
|
| Author: | DarrenOakley [ Wed Dec 01, 2010 00:31:07 ] |
| Post subject: | Re: Bit more off power grip |
Right update. After speaking to a friend and him also looking at it and noticing I had installed the caster blocks on the wrong side  I will now try it again and would imagine it will feel a bit different. The odd thing is it felt ok with 4deg forward caster just had to tone the steering rate down.
|
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|