XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Gearing for indoor racing https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=10944 |
Page 1 of 1 |
Author: | Andy S [ Mon Nov 22, 2010 01:18:54 ] |
Post subject: | Gearing for indoor racing |
Hi I have a T2 008 touring car and was woundering what the best gearing is for indoor racing. I currently have a 87 tooth spur to a 20T pinion and I am using a 13.5 turn motor. Any help would be appreciated ! Cheers |
Author: | Chris-S [ Mon Nov 22, 2010 09:27:30 ] |
Post subject: | Re: Gearing for indoor racing |
Size of track ? Motor and speedo make ? |
Author: | Marek Gadomski [ Mon Nov 22, 2010 19:47:31 ] |
Post subject: | Re: Gearing for indoor racing |
i need some info too. for t3'11 for medium scale indoor track with 9,5t Gm Sport PRO, Lrp SPX v1 on 8 program, Gm 3400 30C life, for spec (Prostock) |
Author: | Andy S [ Tue Nov 23, 2010 01:49:59 ] |
Post subject: | Re: Gearing for indoor racing |
Hi The main indoor track I race at is medium scale. Im running a 13.5 Nosram dragon motor and a LRP Sphere TC spec speedo ! Cheers |
Author: | zzoebl [ Fri Nov 26, 2010 11:44:08 ] |
Post subject: | Re: Gearing for indoor racing |
Normally the motor manufacturer includes a gearing chart. @Andy S: Nosram and LRP are basically the same, I couldn't find the manual for Nosram, but this should be LRP equivalent: You need to do some testing but around 6 should be a good starting point. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |