| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Low speed rotation https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=10935 |
Page 1 of 1 |
| Author: | aztecz [ Wed Nov 17, 2010 12:04:14 ] |
| Post subject: | Low speed rotation |
Would need help with the cars low speed rotation, specifically tight hairpins. Car seems to hesitate in rotatation. Run car on carpet with kit setup. Suggestions? |
|
| Author: | Reuben Manning [ Wed Nov 17, 2010 14:45:59 ] |
| Post subject: | Re: Low speed rotation |
I noticed a bit of this on mine this sunday gone, I ended up helping it turn quicker by putting 2.8 springs on the rear. As with the track and 2.6's for me they were collasping to much on the tighter corners and the car was bogging down. |
|
| Author: | Andrew Webber [ Wed Nov 17, 2010 21:29:09 ] |
| Post subject: | Re: Low speed rotation |
Shorten the wheelbase then add a small amount of anti-squat to balance out the rear end traction. |
|
| Author: | aztecz [ Thu Nov 18, 2010 00:24:32 ] |
| Post subject: | Re: Low speed rotation |
| Author: | Andrew Webber [ Thu Nov 18, 2010 08:39:13 ] |
| Post subject: | Re: Low speed rotation |
Shorten it at rear by 2mm. Try that first, then put some anti-squat in the rear if you find the car pushes on power. What chassis is it? |
|
| Author: | aztecz [ Thu Nov 18, 2010 11:13:15 ] |
| Post subject: | Re: Low speed rotation |
| Author: | walste [ Mon Nov 22, 2010 21:01:53 ] |
| Post subject: | Re: Low speed rotation |
I have the same problem, i have already shorten the wheelbase. How do i add a small amount of anti-squat ? |
|
| Author: | Gary Lanzer [ Tue Nov 23, 2010 17:58:38 ] |
| Post subject: | Re: Low speed rotation |
| Author: | Marek Gadomski [ Fri Nov 26, 2010 21:46:56 ] |
| Post subject: | Re: Low speed rotation |
or change lower suspention holders |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|