XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Grip roll https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=10921 |
Page 1 of 1 |
Author: | ATLASCOPCO [ Mon Nov 08, 2010 01:05:06 ] |
Post subject: | Grip roll |
Can some of you guys please post some tips to remove grip roll Many thanks |
Author: | sidecarphil [ Mon Nov 08, 2010 12:22:32 ] |
Post subject: | Re: Grip roll |
change your set up !!!! |
Author: | Chris-S [ Mon Nov 08, 2010 14:19:05 ] |
Post subject: | Re: Grip roll |
Was this at Rug Racers on sunday ? |
Author: | Gary Lanzer [ Mon Nov 08, 2010 18:54:25 ] |
Post subject: | Re: Grip roll |
Change your tire dopping method, less on the front tire. Change your inner roll center adjusters, raise the holders, or on the rc holders, if at the top already, add shims under the rc blocks. You could also widen the car out. |
Author: | ATLASCOPCO [ Mon Nov 08, 2010 22:11:59 ] |
Post subject: | Re: Grip roll |
Author: | ATLASCOPCO [ Mon Nov 08, 2010 22:13:21 ] |
Post subject: | Re: Grip roll |
Author: | ATLASCOPCO [ Mon Nov 08, 2010 22:14:32 ] |
Post subject: | Re: Grip roll |
Author: | Chris-S [ Mon Nov 08, 2010 22:43:45 ] |
Post subject: | Re: Grip roll |
Author: | Skiddins [ Mon Nov 08, 2010 23:27:49 ] |
Post subject: | Re: Grip roll |
Could also try going with softer springs and slightly wider track. |
Author: | ATLASCOPCO [ Mon Nov 08, 2010 23:32:12 ] |
Post subject: | Re: Grip roll |
Thanks for all the replys ![]() |
Author: | zzoebl [ Wed Nov 10, 2010 13:20:32 ] |
Post subject: | Re: Grip roll |
Try supergluing the sidewalls (outside) on the front tires. (if you haven't already) |
Author: | ATLASCOPCO [ Wed Nov 10, 2010 22:34:44 ] |
Post subject: | Re: Grip roll |
Thanks for this information let`s keep it coming , quite a lot of people from all over the world would benefit from this ![]() |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |