| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Ali spool outputs https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=10920 |
Page 1 of 1 |
| Author: | Quietman [ Sun Nov 07, 2010 21:27:34 ] |
| Post subject: | Ali spool outputs |
Hi Having problems with these on my t3 2011 running the 50mm driveshafts but slight knock and out they come not a bad driver but the slightest tap out they come and destroy themselves or the blade off the driveshaft comes off and eats it.What i would like is steel outputs or a multidiff,any one know if a current multidiff will work or when the newer lipo version will be out? Whent through two pairs today. |
|
| Author: | sidecarphil [ Sun Nov 07, 2010 21:48:51 ] |
| Post subject: | Re: Ali spool outputs |
there is a guy on Ebay selling Alloy ones i bought them last year and have had no problems since |
|
| Author: | ethane [ Tue Nov 16, 2010 01:12:59 ] |
| Post subject: | Re: Ali spool outputs |
flyingfoxrc.com has what you need. |
|
| Author: | Gary Lanzer [ Tue Nov 16, 2010 04:15:19 ] |
| Post subject: | Re: Ali spool outputs |
If you cut the 1mm plastic spacers to fit between the outdrives and the spool it will make them just wide enough to keep the short shafts in place. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|