| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Little help for me ;) https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=10890 |
Page 1 of 1 |
| Author: | Pigiolino [ Sat Oct 23, 2010 21:11:45 ] |
| Post subject: | Little help for me ;) |
Hi Guys, I just replaced the front drive shafts (305326) of my T3 U.S. (2010). Now, inexplicably, everything vibrates and the front when the steering is more than the system makes the engine work harder. I also have the 008 T2 and T3 the new 2011 and everything is ok. What am I doing wrong? Thanks in advance Pier |
|
| Author: | Gary Lanzer [ Sun Oct 24, 2010 01:21:29 ] |
| Post subject: | Re: Little help for me ;) |
Did you replace short ones for long ones and now they are binding on the diff or spool out drives, esp if you run a narrow front end. Easiest way to check is take your shocks off and lift one side up as you rotate the other wheel, if you feel bind, the blades are probably rubbing on the out drive plunge. |
|
| Author: | Pigiolino [ Sun Oct 24, 2010 19:57:08 ] |
| Post subject: | Re: Little help for me ;) |
Thank you so much! I checked Omocinetics and now after released it, cleaned and fixed, now everything is ok! Thank you very very much! Pier |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|