XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Servo position https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=10824 |
Page 1 of 1 |
Author: | rich67 [ Mon Sep 27, 2010 21:58:33 ] |
Post subject: | Servo position |
Hi, just got a used 008, have started to fit electrics and found that I have had to space the servo from the posts about 3mm. It overhangs the chasiss a little, I would say about 2mm. Is this ok? The servo is an Etronics metal geared if that makes any differance. Thanks in advance. |
Author: | walste [ Tue Sep 28, 2010 06:41:41 ] |
Post subject: | Re: Servo position |
Thats OK, but if yoy want, you can get an low profile servo to get it in |
Author: | rich67 [ Wed Sep 29, 2010 00:19:25 ] |
Post subject: | Re: Servo position |
Cool thanks. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |