XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Will xray be releasing a gear diff for the T3/T2 009? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=10777 |
Page 1 of 1 |
Author: | fullout [ Mon Aug 23, 2010 22:02:19 ] |
Post subject: | Will xray be releasing a gear diff for the T3/T2 009? |
If so, when would be a realistic release date. Looking to try one but don't want inferior brands in my xray. DW |
Author: | Jonny_Robinson [ Thu Aug 26, 2010 23:47:06 ] |
Post subject: | Re: Will xray be releasing a gear diff for the T3/T2 009? |
Hi, The Spec R diff is really good quality, ive used it for months now in modified/lipo with no problems whatsoever. Good enough for Rhinehard, good enough for anyone! Jonny |
Author: | fullout [ Fri Aug 27, 2010 07:41:36 ] |
Post subject: | Re: Will xray be releasing a gear diff for the T3/T2 009? |
Author: | joey [ Fri Aug 27, 2010 23:14:43 ] |
Post subject: | Re: Will xray be releasing a gear diff for the T3/T2 009? |
the spec R is a great diff, i have one in my T3 i havent had a problem with it.. it does leak alittle around the outdrives but they have released new orings that should solve that prob |
Author: | walste [ Wed Sep 01, 2010 07:08:45 ] |
Post subject: | Re: Will xray be releasing a gear diff for the T3/T2 009? |
What o-rings should i get to fix the bleeding problem? |
Author: | micwrc [ Wed Sep 01, 2010 19:55:33 ] |
Post subject: | Re: Will xray be releasing a gear diff for the T3/T2 009? |
Is necessary to assemble the drive shafts 50 mm in te Spec-R gear differential? Because the pilots Xray officers in the European Championship or World Championship did not use Gear differential? |
Author: | sidecarphil [ Wed Sep 01, 2010 20:36:30 ] |
Post subject: | Re: Will xray be releasing a gear diff for the T3/T2 009? |
i think what you are asking is do you have to use the 50mm drive shafts Answer is No , i use the 52mm , you just need to add .5mm spacers to the lower roll centre adjusters this will make the rear end wider to allow for the longer shafts |
Author: | neffy [ Sun Sep 26, 2010 14:24:15 ] |
Post subject: | Re: Will xray be releasing a gear diff for the T3/T2 009? |
Hi, If you are having problems with Spec-R geared diff leaking use the updated O-rings from Spec-r and also change the paper gaskets after 2 or 3 times you have opened the Diff. These are available from ABE-Racing.com part numbers SPR010.0R and the gaskets SPR010-S. Hope this sorts your leaks out. |
Author: | Mark Christopher [ Thu Sep 30, 2010 16:52:22 ] |
Post subject: | Re: Will xray be releasing a gear diff for the T3/T2 009? |
who makes the spec r diff? |
Author: | Sir Slide Alot [ Thu Sep 30, 2010 18:01:56 ] |
Post subject: | Re: Will xray be releasing a gear diff for the T3/T2 009? |
Spec-R is the brand. And Xray can make a much better diff. so do it. ![]() |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |