| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| chassis flex on the T3 https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=10759 |
Page 1 of 1 |
| Author: | tellor [ Sat Aug 14, 2010 12:03:13 ] |
| Post subject: | chassis flex on the T3 |
Hi all, can someone tell me what screws to remove from the top deck and chassis to improve flex? The only drawings I can find are from the 009 Thanks |
|
| Author: | Jonny_Robinson [ Sat Aug 14, 2010 20:39:30 ] |
| Post subject: | Re: chassis flex on the T3 |
Hi, Obviously you can easily remove the front post and rear posts. Then u can take out the furthest forward screw at the rear of the top deck. We call this the "layshaft screw". U could also consider cutting the top deck at the rear... Jonny |
|
| Author: | sidecarphil [ Sat Aug 14, 2010 21:55:56 ] |
| Post subject: | Re: chassis flex on the T3 |
| Author: | zzoebl [ Sun Aug 15, 2010 09:32:03 ] |
| Post subject: | Re: chassis flex on the T3 |
Hi Tellor, Take a look at this, I would also consider what sidecarphil mentioned before going to the softest setting. rubber foam |
|
| Author: | tellor [ Sun Aug 15, 2010 20:03:00 ] |
| Post subject: | Re: chassis flex on the T3 |
Hi zzoebl Thanks for the info you're a star! |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|