XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
set up help for a very tight ashpalt track https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=10735 |
Page 1 of 1 |
Author: | Crookie [ Sat Aug 07, 2010 08:53:19 ] |
Post subject: | set up help for a very tight ashpalt track |
Hi guys my local club has a very tight ashpalt track layout that is quite small there is one straight that is about 15 meters long with the rest of the track being tight corners. I currently run a t2 008 with lrp x12 17.5t motor, and lrp sxx tc spec esc and lipo, the chassis is set up to basic ashpalt set up. can anyone recomend some set up changes or ideas that would help improve my runs |
Author: | sidecarphil [ Sat Aug 07, 2010 18:32:37 ] |
Post subject: | Re: set up help for a very tight ashpalt track |
try this one from Joep we were at Andernach in Germany and that was a tight and technical track |
Author: | Marek Gadomski [ Tue Aug 10, 2010 21:12:17 ] |
Post subject: | Re: set up help for a very tight ashpalt track |
I have same problem, but i need low grip set-up for '009. I'm running with 20T brushed motor. I need stable and not-loosing so much speed in corners set. Can anyone help me ? ![]() I have another question can i copy set-up's from T3 to T2' 009 ? ![]() |
Author: | YELLOWSHARK [ Tue Aug 10, 2010 23:07:53 ] |
Post subject: | Re: set up help for a very tight ashpalt track |
Author: | Skiddins [ Wed Aug 11, 2010 00:33:23 ] |
Post subject: | Re: set up help for a very tight ashpalt track |
Author: | Crookie [ Wed Aug 11, 2010 08:16:09 ] |
Post subject: | Re: set up help for a very tight ashpalt track |
Author: | Marek Gadomski [ Wed Aug 11, 2010 15:19:26 ] |
Post subject: | Re: set up help for a very tight ashpalt track |
Thanks for all. ![]() |
Author: | YELLOWSHARK [ Wed Aug 11, 2010 21:21:45 ] |
Post subject: | Re: set up help for a very tight ashpalt track |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |