| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Temperature tyres https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=10673 |
Page 1 of 1 |
| Author: | Ruben_qlc [ Fri Jul 16, 2010 11:52:54 ] |
| Post subject: | Temperature tyres |
Good morning. Can anybody tell me what is the ideal temperature that I have to put into the warmer for Nosram 30X tyres???? And how much time before I have to put it?? Thank you very much. |
|
| Author: | YELLOWSHARK [ Fri Jul 16, 2010 14:33:51 ] |
| Post subject: | Re: Temperature tyres |
A couple of years ago I had a conversation with an RC racer who worked for Dunlop. He was adamant that racers over-warm their tyres and that 45 was optimum - works for me. About 10 mins - although I normally bake on the additive first, 25-30 mins at 55. There was not any inference that different tyres needed different temperatures. In the winter I sometimes use 50 depending on time between the warmers coming off and the race starting |
|
| Author: | Martin Hudy [ Fri Jul 16, 2010 14:41:42 ] |
| Post subject: | Re: Temperature tyres |
Hi, we (team) always warm tires on 60°. I would say that 20 minutes is the best time. if the track is super hot and tires can overheat, take the warmers out 10 minutes before the run. Although tires would feel cold, you will have good traction right away and no overheat problem. If the track is cold, take the warmers down just before you go driving. |
|
| Author: | Ruben_qlc [ Fri Jul 16, 2010 18:41:54 ] |
| Post subject: | Re: Temperature tyres |
Thank you for your answer. When the track is hot, I have put the warmer 10 minutes before racing. OK ! But, when the track is cold,I have put the warmer 2 or 1 minutes before racing?? |
|
| Author: | Skiddins [ Fri Jul 16, 2010 22:36:53 ] |
| Post subject: | Re: Temperature tyres |
| Author: | Ruben_qlc [ Mon Jul 19, 2010 00:04:20 ] |
| Post subject: | Re: Temperature tyres |
Guys, one question more. When the track is cold. I explain. The temperature is of sunny day, but at the morning 9.00 more or less, when the track is no so hot. I have to put additive??? And how many degrees on the warmers? Thank you very much. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|