I have big problems with my whole drivetrain.
after 25-28 runsin the past , today i want to run again, but the car was only able to drive 2 chicanes and on the straight it lost power, feeling like an open diff.
1) some colleagues said, it is the rotor from my brushless - i usean other motor -some problem
2) some colleagues said,it is the main layshaft and the pulleys,- i check this, but can´t see any error.
3) one guy said, that there is a pending problem with the trustbearing of the diffs.
so i disassemble the whole diff, and what i can see is, that the diff balls are very loose in the spur gear (looking as they are too small!!) , and the cone washers were a little bit flat and not so strenght
after the rebuilting of the diff without a spare part i set it very,very tighten and try to run again.
AFTER 2 CURVES THE SAME ISSUE AS ABOVE;
LOOSE DRIVE TRAIN !!!!!
--feeling like an open diff, also on the straight,car is getting slower and slower.....
we hold down the front tires and the rear tires and try to rotate the spur gear.
there is a small "click" and the spur gear jumps a small unit, but where ????
WHAT IS GOING ON HERE
I AM VERY;VERY ANGRY
AFTER 27 years of making this hobby I m on the end ....
after 4.5h of rebulilding, checking I have NO IDEA
regard
sad harry
in vienna
still have no idea what i have to buy to get in shape with my T3, whatI bought 2 weeks before.