XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
T3 top Deck "Cut" https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=10558 |
Page 1 of 1 |
Author: | jackthegripper [ Wed Jun 09, 2010 16:12:21 ] |
Post subject: | T3 top Deck "Cut" |
Hi , in many photos I noticed that many drivers cut the rear part of Topdeck for more rear traction, I appreciate your comments.. Thanks. |
Author: | Martin Hudy [ Wed Jun 09, 2010 18:03:07 ] |
Post subject: | Re: T3 top Deck "Cut" |
Hey, we do not do it beacause of traction but because of slightly better cornering speed. However, if you cut it, in corner steering is decreased |
Author: | sidecarphil [ Wed Jun 09, 2010 21:23:31 ] |
Post subject: | Re: T3 top Deck "Cut" |
is this something to do for a low grip asphalt track ??? |
Author: | Martin Hudy [ Thu Jun 10, 2010 12:30:58 ] |
Post subject: | Re: T3 top Deck "Cut" |
as I said, it does not increase traction. If you want to increase traction, use softer rear anti-roll bar or higher rear toe in or low position on rear roll center arms |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |