Hey martin , will you and tge rest od the xray team be at ETS next weekend ??
It would be nice to meet you and discuss the car
great car by the way
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| set up for a tight technical asphalt track https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=10457 |
Page 1 of 1 |
| Author: | sidecarphil [ Sun May 09, 2010 21:11:18 ] |
| Post subject: | set up for a tight technical asphalt track |
i am looking for help after todays testing i was on a tight technical track today and although the car drove well i could do with i little more steering , i was on full lock though the infield a lot and i feel i could do with some more steering and a little more rear grip would making the car narrower at the front help ?? this was my set up from the the end of the day i changed a little due to lack of time. any help would be nice |
|
| Author: | Martin Hudy [ Thu May 13, 2010 14:30:05 ] |
| Post subject: | Re: set up for a tight technical asphalt track |
hey, I would recommend to use rear stands, your set up seems to create a lot of traction but not enough steering please check my set up xform/index.php?act=view&ID=1476&setup=t3 |
|
| Author: | savo [ Fri May 14, 2010 01:36:34 ] |
| Post subject: | Re: set up for a tight technical asphalt track |
| Author: | Martin Hudy [ Fri May 14, 2010 11:12:41 ] |
| Post subject: | Re: set up for a tight technical asphalt track |
Hey, I measure downstops (droop) with shock and also with bars |
|
| Author: | sidecarphil [ Fri May 14, 2010 14:40:38 ] |
| Post subject: | Re: set up for a tight technical asphalt track |
Hey martin , will you and tge rest od the xray team be at ETS next weekend ?? It would be nice to meet you and discuss the car great car by the way
|
|
| Author: | Martin Hudy [ Fri May 14, 2010 16:06:56 ] |
| Post subject: | Re: set up for a tight technical asphalt track |
I would really like to discuss about car and set up with you bu unfortunatelly I will not attend ETS race becuase I am in US on Xray challenge with my NT1. Maybe at the Euros or Worlds? |
|
| Author: | sidecarphil [ Fri May 14, 2010 22:33:59 ] |
| Post subject: | Re: set up for a tight technical asphalt track |
thats a shame Martin I have bought the the H roll centre adjuster especiallyfor this event I hope to do well this weekend but we will see
|
|
| Author: | Martin Hudy [ Sat May 15, 2010 14:15:22 ] |
| Post subject: | Re: set up for a tight technical asphalt track |
H roll centers will be great at Hemstede track, because this track is big with long corners when cornering speed is needed. Put H roll centers and use 2mm shims under front linkage and 5mm shims under rear linkage. Maybe Xenon wheel would touch the rear screw when 5mm shim is used, if that happens, cut little from the screw with dremel. Good luck |
|
| Author: | David_Ehrbar [ Tue May 18, 2010 14:38:35 ] |
| Post subject: | Re: set up for a tight technical asphalt track |
| Author: | sidecarphil [ Tue May 18, 2010 18:32:21 ] |
| Post subject: | Re: set up for a tight technical asphalt track |
I am doing stock mate but the H roll centre adjusters havnt come in at my local shop  NOT A HAPPY MAN !!!!! |
|
| Author: | David_Ehrbar [ Wed May 19, 2010 12:22:00 ] |
| Post subject: | Re: set up for a tight technical asphalt track |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|