XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Quality problem https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=10409 |
Page 1 of 1 |
Author: | Swanny [ Sat Apr 24, 2010 13:53:33 ] |
Post subject: | Quality problem |
Not sure if this is related to just my kit, or is a general problem, but when I installed a 1.8mm sway bar on the front of my T2'009, the ball ends didn't go on as the hole wasn't big enough. I had to drill it out with a 2mm drill bit to get it to fit. In addition, I had to remove a little of the plastic on the sway bar mount to get it to be free. Hopefully Martin or Mario will read this and consider a change (if it hasn't been made already). |
Author: | YELLOWSHARK [ Sun Apr 25, 2010 12:01:14 ] |
Post subject: | Re: Quality problem |
I think you will find they are designed to take a max. of 1.6mm, so it is not a quality problem. Whether or not you consider that a design problem you will have to take up with Martin etc ![]() |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |