XRAY - Model racing cars

Not sure if this is related to just my kit, or is a general problem, but when I installed a 1.8mm sway bar on the front of my T2'009, the ball ends didn't go on as the hole wasn't big enough. I had to drill it out with a 2mm drill bit to get it to fit. In addition, I had to remove a little of the plastic on the sway bar mount to get it to be free.

Hopefully Martin or Mario will read this and consider a change (if it hasn't been made already).

I think you will find they are designed to take a max. of 1.6mm, so it is not a quality problem. Whether or not you consider that a design problem you will have to take up with Martin etc