For the sake of a few pennys or cents please try replacing the lay shaft bearing holders to the t2 009 ones they have a different off set i belive .
let us know how you get on
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Front belt partial ragged tooths https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=10352 |
Page 1 of 1 |
| Author: | ww2 [ Wed Mar 31, 2010 22:25:00 ] |
| Post subject: | Front belt partial ragged tooths |
| Author: | Skiddins [ Wed Mar 31, 2010 22:33:34 ] |
| Post subject: | |
| Author: | ww2 [ Wed Mar 31, 2010 22:39:29 ] |
| Post subject: | |
| Author: | Gary Lanzer [ Thu Apr 01, 2010 01:44:56 ] |
| Post subject: | |
| Author: | ww2 [ Wed Apr 07, 2010 07:42:27 ] |
| Post subject: | |
Gary, i shortened the screw on the pinion so that the screw does not look out of the pinion now. I also detected, that the front belt can touch the lower side of the servo saver: I will try to drive with max. tight front belt... |
|
| Author: | Skiddins [ Wed Apr 07, 2010 14:44:33 ] |
| Post subject: | |
| Author: | ww2 [ Wed Apr 07, 2010 14:47:48 ] |
| Post subject: | |
| Author: | NunoGancho [ Wed Apr 07, 2010 23:11:19 ] |
| Post subject: | |
| Author: | ww2 [ Thu Apr 08, 2010 10:18:08 ] |
| Post subject: | |
| Author: | NunoGancho [ Thu Apr 08, 2010 10:58:44 ] |
| Post subject: | |
| Author: | Skiddins [ Thu Apr 08, 2010 14:41:27 ] |
| Post subject: | |
| Author: | ATLASCOPCO [ Wed May 05, 2010 20:38:04 ] |
| Post subject: | Re: Front belt partial ragged tooths |
For the sake of a few pennys or cents please try replacing the lay shaft bearing holders to the t2 009 ones they have a different off set i belive . let us know how you get on
|
|
| Author: | ww2 [ Wed May 05, 2010 23:11:16 ] |
| Post subject: | Re: Front belt partial ragged tooths |
The problem was the screw of the pinion. I shortened the screw and now all is OK. |
|
| Author: | ATLASCOPCO [ Wed May 05, 2010 23:46:38 ] |
| Post subject: | Re: Front belt partial ragged tooths |
My friend had this problem and it was down to the bearing bushes he has changed to the 09 ones and it moved the belt further away from pinion grub screw . Please confirm this for us Mr Hudy |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|