| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Air bubbles in shocks https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=10320 |
Page 1 of 1 |
| Author: | michelw [ Sun Mar 21, 2010 17:25:22 ] |
| Post subject: | Air bubbles in shocks |
| Author: | Hagberg [ Sun Mar 21, 2010 20:24:00 ] |
| Post subject: | |
| Author: | B3nzaah [ Mon Mar 22, 2010 03:33:48 ] |
| Post subject: | |
I think a bit of patience when building your shocks goes a long way to keeping air out of them. When open and full of new oil let them sit for a while so the air bubbles work their way to the top. I will soak the orings first then use the associated green shock slime on the orings when building them for the first time. I usually replace the shock seals before a big meet or every 6 to 8 club meets. I will check my shocks before every meet and its only when i have a big crash that the shocks seem to collect air. And even then its only 1 out of the 4 that may need a top up and rebleed. |
|
| Author: | lauri [ Mon Mar 22, 2010 13:28:10 ] |
| Post subject: | |
| Author: | michelw [ Mon Mar 22, 2010 16:16:07 ] |
| Post subject: | |
| Author: | michelw [ Fri Mar 26, 2010 19:08:19 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|