| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| T2R Pro Genius 90 overheating https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=10303 |
Page 1 of 2 |
| Author: | ww2 [ Tue Mar 16, 2010 21:20:06 ] |
| Post subject: | T2R Pro Genius 90 overheating |
| Author: | YELLOWSHARK [ Wed Mar 17, 2010 01:18:49 ] |
| Post subject: | |
| Author: | YELLOWSHARK [ Wed Mar 17, 2010 01:20:00 ] |
| Post subject: | |
| Author: | Joao Miguel [ Thu Mar 18, 2010 22:52:55 ] |
| Post subject: | |
| Author: | David_Ehrbar [ Fri Mar 19, 2010 10:22:19 ] |
| Post subject: | |
| Author: | john_boy [ Sat Mar 20, 2010 01:04:12 ] |
| Post subject: | |
sorry to but in, but i am having the same probs with my nosram 10.5 with 21pinion and 84 spur ? and when i do drop a tooth i top out qouter the way down the main strait ??? i have a friend with a 13.5 and he runs his a lot higher than mine and its nerly cold coming off the track ? sorry again to but in . 
|
|
| Author: | john_boy [ Sat Mar 20, 2010 01:06:18 ] |
| Post subject: | |
| sorry forgot to say its a T3 sorry .
|
|
| Author: | YELLOWSHARK [ Sat Mar 20, 2010 02:11:20 ] |
| Post subject: | |
| Author: | john_boy [ Sat Mar 20, 2010 13:38:58 ] |
| Post subject: | |
| Author: | sidecarphil [ Sat Mar 20, 2010 13:54:53 ] |
| Post subject: | |
| Author: | john_boy [ Sat Mar 20, 2010 14:04:40 ] |
| Post subject: | |
| Author: | sidecarphil [ Sat Mar 20, 2010 15:55:13 ] |
| Post subject: | |
| Author: | john_boy [ Sat Mar 20, 2010 18:48:54 ] |
| Post subject: | |
so if i gear it to a 23 pinion and a 84 spur will i cook it ?? it just advances just before the corner? nothink could get nere it realy but the motor was cooking ?? |
|
| Author: | ww2 [ Sun Mar 21, 2010 20:37:09 ] |
| Post subject: | |
| Author: | YELLOWSHARK [ Sun Mar 21, 2010 20:47:09 ] |
| Post subject: | |
| Author: | ww2 [ Sun Mar 21, 2010 21:23:52 ] |
| Post subject: | |
| Author: | john_boy [ Mon Mar 22, 2010 00:36:01 ] |
| Post subject: | |
Thanks buddy I will try and drop the mode down then and run a 23 pinion with a 84 spur the trake is a fast open one with little corners ? Many thanks |
|
| Author: | john_boy [ Mon Mar 22, 2010 00:40:27 ] |
| Post subject: | |
Sorry forgot to say what is the max temp for a 10.5 brushless motor and also what is the normal runnig temp many thanks |
|
| Author: | YELLOWSHARK [ Tue Mar 23, 2010 00:07:37 ] |
| Post subject: | |
| Author: | john_boy [ Tue Mar 23, 2010 20:58:41 ] |
| Post subject: | |
| Page 1 of 2 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|