hi andreas,
thanks a lot for your setup tips, you wrote the orange xenon inserts
with hard xray wheels are for most conditions the best,
should i use them also on indoor carpet?
thx again
,
best regards
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Andreas Myberg and Alex Lopez can u answer some questionspl? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=103 |
Page 1 of 1 |
| Author: | xray man [ Fri Sep 17, 2004 09:55:48 ] |
| Post subject: | Andreas Myberg and Alex Lopez can u answer some questionspl? |
| Author: | Emil [ Fri Sep 17, 2004 14:01:27 ] |
| Post subject: | |
| Author: | Andreas Myrberg [ Fri Sep 17, 2004 17:56:36 ] |
| Post subject: | Stuff |
| Author: | Emil [ Fri Sep 17, 2004 18:25:55 ] |
| Post subject: | |
| Author: | Andreas Myrberg [ Sat Sep 18, 2004 06:28:11 ] |
| Post subject: | |
| Author: | xray man [ Sun Sep 19, 2004 12:16:10 ] |
| Post subject: | tyres |
Sorry for no detail.I mainly wanted to know what tyre is the most popular eg take off, sorex....Im trying to choose a fast tyre but i dont know what i should choose the temp will be arond 35-40 degrees.I have the most experience with take off 27's. |
|
| Author: | Emil [ Mon Sep 20, 2004 17:20:28 ] |
| Post subject: | |
| Author: | Andreas Myrberg [ Mon Sep 20, 2004 22:10:55 ] |
| Post subject: | |
| Author: | xray man [ Tue Sep 21, 2004 13:51:00 ] |
| Post subject: | tyres |
| Author: | dontfeelcold [ Thu Sep 23, 2004 15:27:30 ] |
| Post subject: | |
Andreas, What inserts and rims would you recomend as a starting point with take off CS27 tyres on a medium to high traction track which is normally used for 1/5 scale gas cars so it is quite large. thanks Josh |
|
| Author: | xray man [ Fri Sep 24, 2004 01:48:38 ] |
| Post subject: | motors |
| Author: | Andreas Myrberg [ Fri Sep 24, 2004 14:26:20 ] |
| Post subject: | |
| Author: | xdriver [ Sat Sep 25, 2004 09:24:27 ] |
| Post subject: | |
| Author: | Andreas Myrberg [ Sun Sep 26, 2004 13:41:39 ] |
| Post subject: | |
Hi xdriver, If the grip is good I would recommend that you us, white springs front and rear. 1,5 degree camber front and 1 degree rear. I would start with the front shocks in the 4:th hole and the rear in the upper or second most upper one. Also using the steering links in the forward positions, maybe also considering using about 1-3 degrees toe out front for extra steering in the tight parts of the track. Castor, you have to test for your self but try in this order. 0 kick up/middle holes--3 caster blocks 1.5 antidive/lower hole front, middle rear---3 caster blocks. 0 kick up/middle holes---0 caster block. Some of these should be good. less caster for tighter turns. start with this and test some then report back. Best regards Andreas Myrberg |
|
| Author: | xdriver [ Sun Sep 26, 2004 14:03:49 ] |
| Post subject: | |
hi andreas, thanks a lot for your setup tips, you wrote the orange xenon inserts with hard xray wheels are for most conditions the best, should i use them also on indoor carpet?
thx again ,
best regards |
|
| Author: | Andreas Myrberg [ Sun Sep 26, 2004 14:17:28 ] |
| Post subject: | |
No, the Xenons are for aphalt racing, for carpet racing you should use JB blue ones, try both 2 piece and 1 piece inserts. Wheel most of the time you should use the Xray hard wheel but in very low grip conditions try a medium or soft. Best regards Andreas Myrberg |
|
| Author: | xdriver [ Sun Sep 26, 2004 17:57:09 ] |
| Post subject: | |
next week i will test it, great! thx for your help!
best regards
thx for help andreas
|
|
| Author: | xray man [ Tue Oct 05, 2004 08:25:01 ] |
| Post subject: | questions |
Hi, Andreas what body shell would u recomend and also wat stock motor would u recommend if u know anything about them ? thanx |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|