many thanks martin i will try that then i wasent realy sure if they have play in the ball joints .
many thanks mate
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| advice on set up https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=10186 |
Page 1 of 1 |
| Author: | john_boy [ Sat Feb 13, 2010 01:30:26 ] |
| Post subject: | advice on set up |
| Author: | john_boy [ Sun Feb 14, 2010 20:02:24 ] |
| Post subject: | |
| Author: | Martin Hudy [ Tue Mar 09, 2010 16:03:59 ] |
| Post subject: | |
Hi, when you are adjusting the toe in make sure that your car and radio is on. When you are adjusting it while the servo is off, the value of toe is changing a lot. When the radio is on, check the toe on one side and second side, then move with steering little and check it again, you should get the same value. I use the same steering balls and ball joints since september and I have no problem with play |
|
| Author: | john_boy [ Tue Mar 09, 2010 17:08:42 ] |
| Post subject: | |
many thanks martin i will try that then i wasent realy sure if they have play in the ball joints . many thanks mate
|
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|