| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| 25% rebound or less with ALU Shock https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=10149 |
Page 1 of 1 |
| Author: | Joep [ Wed Feb 03, 2010 00:21:35 ] |
| Post subject: | 25% rebound or less with ALU Shock |
| Author: | MattWinyard [ Wed Feb 03, 2010 00:37:19 ] |
| Post subject: | |
| Author: | Joep [ Wed Feb 03, 2010 07:41:52 ] |
| Post subject: | |
| Author: | MattWinyard [ Thu Feb 04, 2010 00:50:38 ] |
| Post subject: | |
| Author: | Joep [ Thu Feb 04, 2010 07:52:08 ] |
| Post subject: | |
| Author: | Joep [ Fri Feb 05, 2010 08:48:53 ] |
| Post subject: | |
| Author: | WEBBY1977 [ Sat Feb 06, 2010 00:35:09 ] |
| Post subject: | |
| Author: | Joep [ Sat Feb 06, 2010 07:26:12 ] |
| Post subject: | |
I drilled a 1.1 mm hole. See pictures for location (red dot) Disassemble the shocks and drill the hole in the composite part. Entry point Exit point And leave the foam out. When closing the shock have the piston fully in. Maybe you need to bleed once but then you got rebound 0-25% 
|
|
| Author: | MattWinyard [ Sat Feb 06, 2010 15:30:16 ] |
| Post subject: | |
Great news to hear you have succeeded, I keep a set of drilled caps in my spares box but have very rarely used them. Did you try drilling with the foam inserts also? Bet them shocks are silky smooth now! |
|
| Author: | Joep [ Sat Feb 06, 2010 20:33:21 ] |
| Post subject: | |
| Author: | srw_g [ Thu Feb 11, 2010 15:21:31 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|