XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Arms not lifting with 1.2 roll bar does it matter ? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=10106 |
Page 1 of 1 |
Author: | Ronaldo808 [ Tue Jan 19, 2010 18:50:18 ] |
Post subject: | Arms not lifting with 1.2 roll bar does it matter ? |
Author: | Skiddins [ Tue Jan 19, 2010 20:27:58 ] |
Post subject: | |
If the shocks are still attached, it definitely won't lift, but I've found that the 1.2's are very thin. Moving the roll bar arms as you have mentioned changes the tension on the roll bar, you might as well fit a thicker roll bar. Skiddins |
Author: | Ronaldo808 [ Wed Jan 20, 2010 02:16:49 ] |
Post subject: | |
i'm talking about with shocks not attached i cant get them to lift anymore it . question is will it still do the job its put there for or is it a must i get arms to move with shocks detached |
Author: | Skiddins [ Wed Jan 20, 2010 02:46:24 ] |
Post subject: | |
If they are attached they are doing their job, it's just that the effect of a 1.2mm is less pronounced so to your eyes, it appears to be doing nothing. Try removing it and see. Skiddins |
Author: | Martin Hudy [ Wed Jan 20, 2010 18:17:43 ] |
Post subject: | |
If you use outer bar position on the arm, the arms do not have to lift with 1.2 bar but it does not mean that bar is not working. Try to drive without bar and you can immadiately see the difference. You can see that front arms are moving because front bar is harder. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |