I tried to put a 118 spurgear on, but it didn't fit
So I would say 116 max.
- But you can also file the hole bigger
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Spur gear on Xray T3 EU https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=10098 |
Page 1 of 1 |
| Author: | dartvidar [ Sun Jan 17, 2010 15:42:30 ] |
| Post subject: | Spur gear on Xray T3 EU |
What is the biggest Spur gear who fits on the Xray T3EU?? Im now sitting and ordering Spur and pinion gear, so I have to be sure it will fits. I have choose 114 P64 & 116 P64, do they fits on my T3???? |
|
| Author: | eyde [ Sun Jan 17, 2010 15:47:06 ] |
| Post subject: | Spurgear |
I tried to put a 118 spurgear on, but it didn't fit So I would say 116 max. - But you can also file the hole bigger
|
|
| Author: | dartvidar [ Sun Jan 17, 2010 15:51:38 ] |
| Post subject: | |
Do anyone run with the 116 on the T3, or should I go lower??? I just want some tips, so I dont buy some thing I can not use. |
|
| Author: | Martin Hudy [ Wed Jan 20, 2010 18:59:44 ] |
| Post subject: | |
it depends if you drive modify or stock. in modify, I use 114 and in stock, 104 |
|
| Author: | midnightexpress1 [ Wed Jan 20, 2010 23:38:23 ] |
| Post subject: | |
what is the main differences between the 48 pitch and the 64 pitch gears,I can see the spurs on the 64p is in the 115 range and the 48p is in the 80's.I only use 48p ,should I consider using 64p cheers |
|
| Author: | rx7ttlm [ Thu Jan 21, 2010 08:42:57 ] |
| Post subject: | |
| Author: | dartvidar [ Thu Jan 21, 2010 13:45:17 ] |
| Post subject: | |
| Author: | Gary Lanzer [ Thu Jan 21, 2010 19:41:56 ] |
| Post subject: | |
| Author: | Martin Hudy [ Fri Jan 22, 2010 16:24:35 ] |
| Post subject: | |
| Author: | Gary Lanzer [ Fri Jan 22, 2010 17:48:56 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|