| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| T3 Body Selection https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=10051 |
Page 1 of 1 |
| Author: | big_gord24 [ Tue Jan 05, 2010 04:36:22 ] |
| Post subject: | T3 Body Selection |
I'm just wondering what body most drivers are using on their T3 and why. I'm curently using a Protoform Speed 6 and I'm going to try the HPI Subaru....The Protoform R9 body was too agressive on my 008 so I'm leary of trying it on the T3... |
|
| Author: | 20 SMOKE [ Tue Jan 05, 2010 20:37:10 ] |
| Post subject: | |
| Author: | dougmartin [ Tue Jan 05, 2010 21:38:04 ] |
| Post subject: | |
| Author: | mads_bisgaard [ Tue Jan 05, 2010 22:32:06 ] |
| Post subject: | |
| Author: | YELLOWSHARK [ Wed Jan 06, 2010 02:14:13 ] |
| Post subject: | |
| Author: | MattWinyard [ Thu Jan 07, 2010 10:48:01 ] |
| Post subject: | |
| Author: | dartvidar [ Mon Jan 11, 2010 02:23:16 ] |
| Post subject: | |
Do the HPI BMW M3 190MM Touring Car RC Body #310 fit on the T3? Have any one tried HPI Touring bodys on T3? I have just bought the T3 and looking for bodies. I had planed to buy Protoform LTCR as racing body, but I was looking at the BMW body for training and fun, but I just wounder if it's fits, and how it's handle?? Another question for the guys who racing, do you bodies often break? Is it worth to put lot of time in painting and decoration of a racing body, or do it often breaks so it's better to make it plain color with stickers?? |
|
| Author: | B3nzaah [ Mon Jan 11, 2010 05:34:47 ] |
| Post subject: | |
I find it very relaxing painting bodies. I use tamiya cans and masking tape. I am by no means perfect and we have 2 very good airbrush artists at the club who do good work cheap but still prefer to do it myself. I went through 7 bodies last year and i tried 2 x Madza 6, 2 x Speed 6, Ltc-R, R9R and Dna 2. I liked the Ltc-R because its an aggressive body but used the speed 6 more successfully as its more consistent. The R9R looks the coolest but doesn't work well. I have the new T3 and will be running the Ltc-R to begin with. I will be trying this Hpi Subaru and the east coast speed 6 for something different. Here is my latest effort. Here are some of my previous efforts. |
|
| Author: | big_gord24 [ Mon May 10, 2010 12:22:40 ] |
| Post subject: | Re: T3 Body Selection |
HPI Subaru......Fail Back to Speed 6 Had some luck with the East Coast Bodies IS250. Very Predictable handle to the car. |
|
| Author: | sidecarphil [ Mon May 10, 2010 12:49:39 ] |
| Post subject: | Re: T3 Body Selection |
these are my efforts for the coming outdoor season again painted with Tamiya spray cans and using XXXmain mask kits |
|
| Author: | binary [ Wed May 19, 2010 09:15:04 ] |
| Post subject: | Re: |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|