| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Trinity Nemisis 17.5 https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=10012 |
Page 1 of 1 |
| Author: | Rick,MI [ Fri Dec 25, 2009 06:45:27 ] |
| Post subject: | Trinity Nemisis 17.5 |
Hi Paul, I have recently bought a 17.5 Turn NEMESIS. I am having a problem getting the timing setup correctly. Im running a T2 009 large pulleys, Tekin Rs speed control. I have it all set-up as the following, 21 on the timing boost, turbo set at max and 6 degrees of timing adv. on the end bell. The issue I'm having right now is at the beginning of the race the car is great good punch and top end. At about the 4 min mark the car starts slowing down. By the end of the race my lap times are about .4 to .5 slower. It loses all of the punch and top end. I check the temp and Im at 165 to 170. Is this to high for this motor? Im also running a fan on the motor. I have tried changing gearing also if I get the temp down then my lap times suffer. Im the only one running this motor combination at this time. There are quite a few people running duo2 with the same speed control. Would I be able to mimic their setup. Any help you can give would be greatly appreciated. Rick |
|
| Author: | or8ital [ Fri Dec 25, 2009 07:46:13 ] |
| Post subject: | |
I would try around a 15 on timing boost and see if that doesn't lower the temps some and keep the motor from fading. Sounds like its just getting hot towards the end and fading on you. |
|
| Author: | bartx7001 [ Fri Dec 25, 2009 07:49:45 ] |
| Post subject: | |
How low is your pack after the run. I have noticed that a lot of timing tends to kill the pack more. I had to get some better packs when I stated to run a lot of timing. |
|
| Author: | trerc [ Fri Dec 25, 2009 15:27:58 ] |
| Post subject: | |
| Author: | Rick,MI [ Fri Dec 25, 2009 16:55:50 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|