It is possible that to me seems Xray T4 on the asphalt slower like Yokomo or Tamiya
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| XRAY T4 ---- General Forum https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=12875 |
Page 5 of 7 |
| Author: | Hagberg [ Sun Mar 17, 2013 17:08:49 ] |
| Post subject: | Re: XRAY T4 ---- General Forum |
Try the new adjustable battery holder #306188 , or you can glue some plastic pieces onto the battery backstops to minimize the play. |
|
| Author: | yodace [ Mon Mar 18, 2013 00:57:10 ] |
| Post subject: | Re: XRAY T4 ---- General Forum |
Can u use both the X-ray battery strap and the X-ray adjustable battery holder together |
|
| Author: | Sid [ Mon Mar 18, 2013 06:15:50 ] |
| Post subject: | Re: XRAY T4 ---- General Forum |
| Author: | THE [ Tue Mar 19, 2013 21:00:16 ] |
| Post subject: | Re: XRAY T4 ---- General Forum |
It is possible that to me seems Xray T4 on the asphalt slower like Yokomo or Tamiya
|
|
| Author: | yodace [ Wed Mar 20, 2013 03:35:06 ] |
| Post subject: | Re: XRAY T4 ---- General Forum |
Does xray sell the shorty body posts that u see in the t4 pictures ? Where can I get those plastic pieces to glue to the battery stops? |
|
| Author: | Hagberg [ Wed Mar 20, 2013 14:05:26 ] |
| Post subject: | Re: XRAY T4 ---- General Forum |
| Author: | yodace [ Thu Mar 21, 2013 03:21:21 ] |
| Post subject: | Re: XRAY T4 ---- General Forum |
I know I just like the body posts in the advertisement lol |
|
| Author: | yodace [ Sun Apr 07, 2013 07:15:32 ] |
| Post subject: | Re: XRAY T4 ---- General Forum |
Is there a mod Or a part, I can buy so the armature and pinion dont rub against the battery...? |
|
| Author: | spotlessdragon [ Sun Apr 07, 2013 18:52:23 ] |
| Post subject: | Re: XRAY T4 ---- General Forum |
| Author: | jschirmchen [ Sat Jun 08, 2013 23:37:12 ] |
| Post subject: | Re: XRAY T4 ---- General Forum |
Hey there, to achieve a certain ratio, it is possible to get there with different combinations of spur gear and pinions. Is there a recomondations to use more higher or more lower amount of teeth? When using spur gears > 94 teeth, it is scratching the setupboard when I push the car down for a quick tweak test. In certain setup sheets, I noticed spur gears >100 teeth. Is there a reason for that? Jörg |
|
| Author: | Skiddins [ Sun Jun 09, 2013 01:09:31 ] |
| Post subject: | Re: XRAY T4 ---- General Forum |
| Author: | Sid [ Sun Jun 09, 2013 10:13:12 ] |
| Post subject: | Re: XRAY T4 ---- General Forum |
| Author: | edij [ Mon Jul 01, 2013 23:28:02 ] |
| Post subject: | Re: XRAY T4 ---- General Forum |
| Author: | nerdling [ Tue Jul 09, 2013 06:18:28 ] |
| Post subject: | Re: XRAY T4 ---- General Forum |
Hi guys, I've been running the T4 since November and I'm pretty happy with it, another great XRAY. I have taken delivey of a set of the new Kevlar Low friction belts and would like to know, how well will these belts perform with a Modified motor (x40 4.5)? |
|
| Author: | Zak [ Sat Jul 13, 2013 18:02:35 ] |
| Post subject: | Re: XRAY T4 ---- General Forum |
| Author: | edij [ Sun Jul 28, 2013 21:35:10 ] |
| Post subject: | Re: XRAY T4 ---- General Forum |
| Author: | msamaro [ Fri Aug 02, 2013 12:16:36 ] |
| Post subject: | Re: XRAY T4 ---- General Forum |
Hi, I just bought a T4 and I haven't raced it yet. I will probably keep it for the start of the indoors season (Essex winter series). So far I was racing with a 2011 T3. I know there is a bumper upper holder for better chassis protection. Is there anything else that you would suggest I should buy? Any advice is welcome. |
|
| Author: | spotlessdragon [ Fri Aug 02, 2013 20:17:27 ] |
| Post subject: | Re: XRAY T4 ---- General Forum |
| Author: | Hagberg [ Tue Aug 13, 2013 21:35:31 ] |
| Post subject: | Re: XRAY T4 ---- General Forum |
| Author: | Hagberg [ Tue Aug 13, 2013 21:36:34 ] |
| Post subject: | Re: XRAY T4 ---- General Forum |
| Page 5 of 7 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|