t2/t3 geometry differences?

JoelV · **Posted:** Thu Aug 11, 2011 05:24:46

Hey guys,

Have an 08 and wondering if the geometry has changed at all. I know a degree is built into the new car in the rear, but otherwise has width changed at all front/rear?

Quick roll centers locations. Have they moved at all? I don't think so, but not sure. This picture says in and up, but I believe that's to do with the change to L1/L2's vs. the original.

http://www.teamxray.com/teamxray/showim ... 71a2befbd6

Any help greatly appreciated. Thanks.

Skiddins · **Posted:** Thu Aug 11, 2011 14:50:43

Can't speak for all of the car, but I know the rear roll centre holes in the shock tower are in different locations on the T3 from the holes on the 009 etc.

Skiddins

JoelV · **Posted:** Wed Aug 24, 2011 04:10:28

So I was able to measure a local racer's t3 but only the rear before he had to leave. The rear is 3mm higher. Does anyone know if the front moved higher as well?

Phil C · **Posted:** Wed Aug 24, 2011 11:08:56

I believe the front height stayed the same, its just the rear that was raised to the same height as the front.

Marek Gadomski · **Posted:** Wed Aug 24, 2011 12:27:33

front bulkheads are higher :idea:

XRAY - Model racing cars

t2/t3 geometry differences?

Who is online