XRAY - Model racing cars

Hi,

I was racing yesterday and used brand new Schumacher Sorex 28R + JB + 24 Revlite.
Since I still search for my setup I still have problems that I lack steering and the cars stops when I turn in.
Now I have seen that the tires, especially on the front, wear out extremely on the outer flank.

Is this because the car stops to much?
Or do I drive wrong camber?

Thanks,

Cypher

Did you tweaked your car?

maybe you have got to much weight on front?
try to give all of your electronics to back or give on back some extra weight

Try simply basic set-up

What is your setup?

My setup is: xform/index.php?act=view&ID=2238&setup=t2_008
Except for 2 modifications I did:
1. Front quick roll-center changed back from 2 to 3.
2. Rear downstop changed from 5 to 4 (to get more steering in slow corners.

During the day I also adjusted the front camber to -1°.
Could it be that I run too less camber?

camber wont fix this

you have got to balance your car
try it

Hi Cypher

Are both front wheels like that?
What surface are you running on? I asume carpet given your ride height
What engine wind are running?
Is the inner ackermann position setup with the tab facing forward or backward?

Yes both Front wheels Look like this. Also it seems to Happen ob the rear too.
It is tight carpet track. I run a LRP X12 17,5T without any Power program.
Tab is facing front so that the servo saver is more to the rear.

Nobody with an idea?

Id say its just because your inserts are not supporting the tyres enough and are rolling over.

Mike