XRAY - Model racing cars

Ok i bought a T3R while I was on my R&R leave from afghanistan and will be returning home in about 3 weeks or so what I need is what do I need to get that doesnt come in the kit to run in boosted 17.5. The track I will be running on will be asphalt treated with VHT. any help will be great thanks

you need set of pinion and spur gears
and some extra shock oil and springs

You might want to buy the front and rear anti-roll bar sets: 302401, 303401. These will improve handling for most conditions and surfaces.

Also some adjustable turnbuckles (at least for the camber) are a pleasure when racing.

It would be:

2x #303212 Alu Adjustable Turnbuckle M3 L/R 26mm - 7075 T6 (2) (for setting the camber at all)
1x #302612 Alu Adjustable Turnbuckle M3 L/R 39mm - 7075 T6 (2) (for easier setting of the front toe)

I don't know what VHT means but if the track has lower or normal grip I think the kit setup is really good then. I started with 350cps (included) and with the front piston with 2 holes and the rear piston with 3 holes. On tracks with a lot of grip I think that the silver springs in the rear and the purple springs (#308396 4pcs.) in the front with 3 holes and 500cps around is pretty good. I pretty much feel comfortable with that on my T3R.