Hi
I race on a tight, relatively low grip carpet track in the UK, so here are my settings
Tyres - use CS22's (with additive), RP24's also OK, but less grip than the CS22's Springs - front C2.6, rear C2.4, generally on the softer mount positions (1-3) (you need to test & adjust) ARB - 1.2mm front, none on rear (you could try 1.4mm/1.2mm as well, but no stiffer) Roll centres - 0mm lower inboard mounts, pos 3 upper quick roll centres, 1mm shims under top outer links (you can play with RC's, the 009 is sensitive to settings, generally you want lower roll centres to promote more roll and tyre loading) Downstops - 5mm front, 6.5mm rear Ride height - 5.0mm front, 5.2mm rear Camber - 1.5deg all round Toe - 0.5deg out front, 3.0 deg in rear Shock oil - 400 front, 350 rear, nil rebound (drilled shock top, no foam inserts), 3 hole pistons (non adjustable) Chassis flex - med to soft I run with a ball diff in the front, not a spool. The spool seems to work better on high grip carpet for some reason, set the diffs as loose as you can without slipping.
Hope this helps
Charles
|