'11 Oversteer

Marek Gadomski · **Posted:** Mon Dec 20, 2010 20:00:40

Hi

Last competition i had big problems with oversteer at corner entry.

my set
please help, it was my first competition with new T3'11.

thanks

Skiddins · **Posted:** Mon Dec 20, 2010 23:56:19

4mm on rear camber link instead of 2mm

Thicker oil all round.

1.4mm front roll bar, no rear or 1.2mm

Skiddins

Gary Lanzer · **Posted:** Tue Dec 21, 2010 07:33:08

What Skiddins said, also -1.5 front camber and -3 rear camber.

m prigmore · **Joined:** Tue Dec 21, 2010 14:00:55 **Posts:** 20

hi, I'm having the same problem but the car also slightly under steers to much on power
any input would be highly appreciated.
xform/index.php?act=view&ID=124&setup=t3_2011

Marek Gadomski · **Posted:** Tue Dec 21, 2010 17:26:40

thanks for all

Reuben Manning · **Joined:** Sun Oct 10, 2010 01:02:56 **Posts:** 28

m prigmore · **Joined:** Tue Dec 21, 2010 14:00:55 **Posts:** 20

Skiddins · **Posted:** Wed Dec 22, 2010 00:28:37

m prigmore · **Joined:** Tue Dec 21, 2010 14:00:55 **Posts:** 20

many thanks reuben and skiddins

m prigmore · **Joined:** Tue Dec 21, 2010 14:00:55 **Posts:** 20

hit the track track today and found, that the front belt was slipping when braking and lock the rear tyres when turning left and spinning the car around like when running a oneway.

raised roll center on front hubs by 0.5mm which help and widen the front track by 0.75 with shims on the wheel hex also help make the car feel settle after the apex.

could do with some more steering on power after apex.

XRAY - Model racing cars

'11 Oversteer

Who is online