XRAY - Model racing cars

make sure the rebound on teh shocks is correct, if the rebound is drastically different for each shock it will handle wierd. Also make sure the shock collars are equal on both fronts and both rears, and lso confirm that the rears are actually rear shocks and the fronts actually front shocks ( this is assuming you sue different pistons and or foam in the bladders, and also shock oils, if they are the same front and rear for those then disregard that ). You can also make sure the shock legnths are the same as well.

superxray that was my first guess also but it is not the case. I also always set up my steering in the manner you suggest however (Kinda feel like an idiot for posting this thread before checking everything) on rebuilding the car i have found that it was not in the greatest of shapes. Front left shock was leaking also droop was slightly out left to right on both front and rear by 1mm and camber was off. Not sure how all this happened but i have fully rebuilt the car and will give it a try next week. Thanks for the suggestions but it was my own set up that looks to be the cause