| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Vacuum line from intake nipple to oil filler neck https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=47&t=28773 |
Page 1 of 1 |
| Author: | JurusGomes [ Sat Oct 26, 2019 08:03:37 ] |
| Post subject: | Vacuum line from intake nipple to oil filler neck |
So the line in question just kind of disintegrated at the nipple on the intake (including part of the nipple itself). So uh, I’m aware of what this line is for. I guess my real question is does anyone know the part number for the little black plastic nipples on the intake, and would leaving it uncapped until I can replace them result in typical vacuum leak problems? Ugh. Air hose joint is the part, and I just ordered one. Anyone know if leaving the spot uncapped or uncovered will foul my idle or anything until I can replace it? |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|