| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| rx8 clutch setting https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=47&t=11675 |
Page 1 of 1 |
| Author: | ruudknoester [ Sat Aug 27, 2011 14:05:33 ] |
| Post subject: | rx8 clutch setting |
Dear sir What is the best clutch setting 0.6 or 0.7 mm.I have a Novarossi engine and want to know what is the best clutch setting to make the clutch more agressive. |
|
| Author: | erock [ Mon Aug 29, 2011 23:35:21 ] |
| Post subject: | Re: rx8 clutch setting |
.7 will hit harder but you will need to keep an eye on how far you have the clutch nut set. To much and you will smoke a shoe. I use an Orion spring and the nut is at .9. |
|
| Author: | ruudknoester [ Tue Aug 30, 2011 21:12:18 ] |
| Post subject: | Re: rx8 clutch setting |
What do you mean about the distance of the clutch nut or is that the endplay. thanks!!!!! |
|
| Author: | Roelof [ Tue Aug 30, 2011 22:02:10 ] |
| Post subject: | Re: rx8 clutch setting |
The distance of the nut is how far it is screwed on the flywheel nut (how much thread is visable) If you have a fresh shoe it is wise to start with 0.6. The shoe will fit itsef comming up to 0.7 and will slowly go to 0.8 |
|
| Author: | erock [ Thu Sep 01, 2011 05:39:57 ] |
| Post subject: | Re: rx8 clutch setting |
| Author: | Pahissa [ Wed Sep 14, 2011 13:21:30 ] |
| Post subject: | Re: rx8 clutch setting |
0.6 should be enough to have plenty of botom power with the clutch. Additionally you can mount the flyweights in the opposite direction. That will make the clutch engage much more aggresively. |
|
| Author: | turbonitro [ Tue Dec 06, 2011 15:46:48 ] |
| Post subject: | Re: rx8 clutch setting |
Continue having the same problem , i am going to buy the SRC clutch bell |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|