| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| X10 15 ride height https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=26&t=18871 |
Page 1 of 1 |
| Author: | Mark Christopher [ Mon Nov 17, 2014 23:12:28 ] |
| Post subject: | X10 15 ride height |
the new contact tyres have bigger rims and im struggling to get a low 3 - 3.5mm ride height wheels are 50mm diameter any thing im missing? |
|
| Author: | Mijo-dk [ Thu Nov 20, 2014 14:00:26 ] |
| Post subject: | Re: X10 15 ride height |
We race on BSR in denmark , and front you have to have at least 2mm shims under front arms. In the rear , we make the tyres in the 54-56 mm and then have rideheight on 4-5mm , not ideal. have been looking on some other brands for the rear axle. Have seen ohers put spacers under both rear-pods , but I dont like that idea. |
|
| Author: | brano [ Thu Jan 15, 2015 06:50:48 ] |
| Post subject: | Re: X10 15 ride height |
The best way is to use shims under the bulkheads - this is easiest way to get the correct ride height. |
|
| Author: | Mark Christopher [ Sun Feb 15, 2015 19:13:17 ] |
| Post subject: | Re: X10 15 ride height |
thanks Brano done it and seems ok |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|