XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
ride Height https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=26&t=12822 |
Page 1 of 1 |
Author: | AndyBird [ Mon Sep 03, 2012 13:54:35 ] |
Post subject: | ride Height |
Hi Guys, looking at the X10 Setup Sheet (basic) for Carpet how have you acheived that height on the front suspension ?? Do you remove the 2.5mm carbon Riser on the front ? |
Author: | FOXY923 [ Mon Sep 03, 2012 16:12:55 ] |
Post subject: | Re: ride Height |
I've never had a problem getting to ride height I needed. You may need to move the shims on the king pin. Those also control ride height. |
Author: | AndyBird [ Mon Sep 03, 2012 19:35:29 ] |
Post subject: | Re: ride Height |
Tried that, yes it helps but does not give me what I need. chassis is at 4.5mm with 0 Shims to adjust ride height and tyres at 53mm. Look at setup sheet how can you get that rideheight with the amount of shims fitted they show. |
Author: | FOXY923 [ Mon Sep 03, 2012 19:41:40 ] |
Post subject: | Re: ride Height |
Wow, 4.5 with 53 tires and no shims? I think I have the king pin shims at the top of the king pin. I'll get a pic later and post. I rarely use less then 2 shims and my ride height is 3-3.5mm. |
Author: | AndyBird [ Mon Sep 03, 2012 19:47:57 ] |
Post subject: | Re: ride Height |
Cheers Mate, has to be something not quite right me thinks. Actual Height is 4.5mm, 0 Shims and the ride height sims are all at the top so the pivot is as low as it can site.. I'm not the only one seeing this issue. I'll get some pics as well. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |