| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| gearing combinations and roll out https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=26&t=10968 |
Page 1 of 1 |
| Author: | mdhyams [ Wed Dec 01, 2010 05:13:50 ] |
| Post subject: | gearing combinations and roll out |
I dont know where to start looking at to make sure I dont melt something down and get the best performance. I am using a 2s lipo with a 13.5 motor, I use a rear tire size of 56MM and 54mm in the front. I also run the 1s with a 13.5 in the WGT class. Will the gearing be the same on both setups. I am trying to find out what 64p gears to use. I am having little luck with researching this information online. Thanks |
|
| Author: | FOXY923 [ Wed Dec 01, 2010 05:16:28 ] |
| Post subject: | Re: gearing combinations and roll out |
I think you posted on RCTech to right? Try this website http://www.comeseethis.com/gearing/Default.aspx I use 2cell lipo but with a 25.5 motor. I have no idea where a 13.5 would be at. I don't think you can use the same as the 1cell though. |
|
| Author: | tudor_47 [ Wed Mar 14, 2012 09:59:44 ] |
| Post subject: | Re: gearing combinations and roll out |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|