XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Axle Carriers https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=26&t=10852 |
Page 1 of 1 |
Author: | ElliotCanada [ Mon Oct 11, 2010 18:11:51 ] |
Post subject: | Axle Carriers |
XRAY - A very important option would be Rear Axle /Bearing Adjusters to Raise the Axle in order to Lower the Ride Height of the X10 Link. The 2 is the highest. A 2.25, 2.50 and a 2.75 who be very much appreciated and I believe would make the car even more competitive. |
Author: | FOXY923 [ Mon Oct 11, 2010 19:10:52 ] |
Post subject: | Re: Axle Carriers |
I agree. With the 2 and fresh tires the rear end is way too high. |
Author: | Hejkal_cz [ Wed Oct 13, 2010 20:06:42 ] |
Post subject: | Re: Axle Carriers |
Guys, put 4mm shims between Link Graphite Rear Pod Lower Plate 2.5mm and rear bulkheads... |
Author: | FOXY923 [ Wed Oct 13, 2010 21:24:17 ] |
Post subject: | Re: Axle Carriers |
Author: | ElliotCanada [ Thu Oct 14, 2010 06:45:03 ] |
Post subject: | Re: Axle Carriers |
That raises the Motor and centre of gravity. It would be great if Xray would offer optional Axle Carriers like the competition. |
Author: | Hejkal_cz [ Thu Oct 14, 2010 11:43:11 ] |
Post subject: | Re: Axle Carriers |
Author: | Hejkal_cz [ Thu Oct 14, 2010 11:43:48 ] |
Post subject: | Re: Axle Carriers |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |