I didn't have parts missing, but I've found the servo saver sloppy as well and I also replaced it by a Kimbrough saver, problem solved. Other then that, the cas performed really well
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Servo saver being sloppy https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=24&t=8809 |
Page 1 of 1 |
| Author: | Eddie M [ Thu Feb 12, 2009 21:22:29 ] |
| Post subject: | Servo saver being sloppy |
| Author: | Paul Paras [ Fri Feb 13, 2009 07:43:06 ] |
| Post subject: | |
You must have a defective saver....the one I have has no slop and returns to center very well. |
|
| Author: | Eddie M [ Fri Feb 13, 2009 18:34:23 ] |
| Post subject: | |
I guess I am one unlucky dude... My kit has missing o-ring for the shock and a bad servo saver... but I have to give credit to XRay for sending me the missing o-ring quickly. I will pick up a new servo saver later on. |
|
| Author: | T29-Belgium [ Fri Feb 13, 2009 18:41:58 ] |
| Post subject: | |
I didn't have parts missing, but I've found the servo saver sloppy as well and I also replaced it by a Kimbrough saver, problem solved. Other then that, the cas performed really well
|
|
| Author: | Didier [ Sun Jun 07, 2009 20:38:16 ] |
| Post subject: | sERVO SAVER |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|