XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Need for Speed?!! https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=24&t=27364 |
Page 1 of 1 |
Author: | Aplam [ Thu Jan 31, 2019 13:55:41 ] |
Post subject: | Need for Speed?!! |
Right, current set up, Xray X12. HPI Flux Pro 10.5 motor. Hobbywing xerun 2.1 speedo, Reedy 7000mah lipo batteries, 76 spur 41 pinion. Rollout of 74.5 I managed to finish 6th in the C Final on Saturday. My best finish to date this season. Clean run, handled well, and no big mistakes. However It seemed to be very sluggish with no real acceleration through the infield too compared to most other cars. I dont think I could get many more laps out of the car due to the lack of speed. How can I get more speed? is it the motor? Gearing? I could probably be a bit tighter round the corners and a bit more consistent but I want to be faster, straight line speed. Any advice? |
Author: | Skiddins [ Thu Mar 14, 2019 11:43:32 ] |
Post subject: | Re: Need for Speed?!! |
75 rollout is what we run using 13.5's so you might need to go down in pinion size. I'm afraid I don't know how much less as I never ran 10.5 1/12's, but perhaps try 65mm rollout |
Author: | rishimellor [ Tue Sep 10, 2019 20:01:25 ] |
Post subject: | Re: Need for Speed?!! |
I love this game really amazing graphics and all. To writers I would suggest you to check for free papers like A1,A2,A3 etc. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |