| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| 1/12 pan car gearing https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=24&t=18657 |
Page 1 of 1 |
| Author: | Joe F [ Wed May 14, 2014 18:58:07 ] |
| Post subject: | 1/12 pan car gearing |
What gearing I will need for 10.5 turn using a 96 spur? Thanks Joe F |
|
| Author: | Peakki [ Mon Jun 02, 2014 09:23:16 ] |
| Post subject: | Re: 1/12 pan car gearing |
With blinky, aim for 60-70mm rollout. But that spur is too big, you need to use about 72T spur gear and 35-40 pinion depending on your tire size. With 96T I think that the motor cannot move far enough in the motor mount for big enough pinion. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|