XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
What Shims Are These (X12 2014 Setup Sheets) https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=24&t=18607 |
Page 1 of 1 |
Author: | Skiddins [ Mon Mar 24, 2014 16:44:46 ] |
Post subject: | What Shims Are These (X12 2014 Setup Sheets) |
Can someone explain what these shims are on the X12 setup sheet and exactly where they fit etc? Thanks Skiddins |
Author: | Niall Cochran [ Tue Mar 25, 2014 01:21:05 ] |
Post subject: | Re: What Shims Are These (X12 2014 Setup Sheets) |
they are to increase the length of the top arm for less camber change. to fit them you have to dremel off the little bit on the lower arm that caster part fits on. I use the 7.5 outer diameter shims from the touring cars |
Author: | Skiddins [ Wed Mar 26, 2014 02:52:24 ] |
Post subject: | Re: What Shims Are These (X12 2014 Setup Sheets) |
So I was right in thinking; A) you have to mod something before anything can be fitted B) There is no reference to this adjustment anywhere in the manual. Is it virtually a standard change to make and what does it do to the handling? Skiddins |
Author: | Hagberg [ Wed Mar 26, 2014 11:20:23 ] |
Post subject: | Re: What Shims Are These (X12 2014 Setup Sheets) |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |