XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
X12 48p https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=24&t=13655 |
Page 1 of 1 |
Author: | Maeg [ Tue Aug 27, 2013 14:31:46 ] |
Post subject: | X12 48p |
Hello! We often race outdoor, so 64p Spur and Pinion isn't very good idea. Is it possible to fit 48p Spur/pinion to X-12? What preferred pair will be for 13.5t motor? |
Author: | Hagberg [ Wed Oct 23, 2013 13:01:39 ] |
Post subject: | Re: X12 48p |
http://kimbroughracingproducts.com/stor ... ory_id=199 If you use a 72 tooth spur with a 44 tooth pinion, and if you use a 42mm rear tire, this will give you a rollout of 80mm which is a good starting point for 13.5T blinky spec racing. |
Author: | Maeg [ Fri Oct 25, 2013 19:11:06 ] |
Post subject: | Re: X12 48p |
Thank you very much. I will Try found those pinions, unfortunate race will be next week, and our local shop don't have enough 64p big size pinions, that's might be problem:( |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |