XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
x12 setup https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=24&t=13520 |
Page 1 of 1 |
Author: | rcspeed [ Sun May 12, 2013 20:51:29 ] |
Post subject: | x12 setup |
Hello, I can't find any setup sheets for the X12 running in 17.5 blinky mode. Can somebody please tell me a good all-around setup for the x12 in blinky mode? thanks |
Author: | Hagberg [ Mon May 13, 2013 14:35:11 ] |
Post subject: | Re: x12 setup |
Do you race on a carpet surface? |
Author: | rcspeed [ Mon May 13, 2013 14:47:16 ] |
Post subject: | Re: x12 setup |
yes. on the 5280 carpet track in Denver and I will be racing on their old carpet in a track that is opening up in pueblo. I am also planning on running at IIC in October this year. I would like to know a good general setup that will work in most situations. and also what springs and other parts I should get to allow me to adjust the car as needed. |
Author: | Hagberg [ Mon Jun 03, 2013 22:46:46 ] |
Post subject: | Re: x12 setup |
This set-up is for high bite carpet: xform/index.php?act=view&ID=83&setup=x12 (however for a flat surface please use 3-3.5mm ride height instead of 4, since that track was very bumpy which I ran at) This is for low bite: xform/index.php?act=view&ID=78&setup=x12 It is useful to get the optional side springs from XRAY, the black ones for instance. Try also the spring set from RC America: RCA 906. As for the center spring, I usually use the kit spring. |
Author: | Joe F [ Fri Apr 25, 2014 11:17:03 ] |
Post subject: | Re: x12 setup |
Any setups for tarmac tracks? Joe F |
Author: | Hagberg [ Wed May 14, 2014 00:07:39 ] |
Post subject: | Re: x12 setup |
xform/index.php?act=view&ID=36&setup=x12_2014 This setup is for indoor asphalt |
Author: | Skiddins [ Wed Jun 04, 2014 13:50:49 ] |
Post subject: | Re: x12 setup |
Hi Alex, would you change anything on those setups for the 2014 version of the X12? I'm particulary interest in the low grip setup, as this is closer to the conditions of some of our smaller club meetings. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |