XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
X12 - Side spring rates? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=24&t=11940 |
Page 1 of 1 |
Author: | Peakki [ Mon Nov 14, 2011 12:27:49 ] |
Post subject: | X12 - Side spring rates? |
First packs with X12 done. Silver springs seem to be too hard and tube oil too thin, changed tube oil to much thicker one and side springs to softer --> better handling car ![]() Now wondering the spring rates. Are the std silver ones harder or softer than optional black (1.7) or gold (1.4)? I haven't bought these black or gold springs yet. |
Author: | brano [ Mon Nov 14, 2011 16:03:18 ] |
Post subject: | Re: X12 - Side spring rates? |
silver 1.1, gold 1.4 and black 1.7 |
Author: | Ole C [ Wed Dec 07, 2011 10:59:28 ] |
Post subject: | Re: X12 - Side spring rates? |
What is your track like Peakki? I find the silver springs ok, but tube oil too thin. What viscosity oil did you end up with? |
Author: | Adri Antomarchi [ Sun Dec 11, 2011 19:14:30 ] |
Post subject: | Re: X12 - Side spring rates? |
hello, after 2 week-ends on a track with my X12, the car feel more directively with the basic set-up. After the second pack, I have tested red side springs CRC and the car feel beter in long and fast corners. For informations, I use 1 hole in the piston of center shock. |
Author: | Peakki [ Mon Dec 12, 2011 23:04:49 ] |
Post subject: | Re: X12 - Side spring rates? |
Author: | Mini_Me [ Sat Dec 17, 2011 23:36:41 ] |
Post subject: | Re: X12 - Side spring rates? |
Author: | Hagberg [ Thu Mar 29, 2012 11:28:28 ] |
Post subject: | Re: X12 - Side spring rates? |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |