| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Speed controllers with LiPo 3.7V https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=24&t=10677 |
Page 1 of 1 |
| Author: | Pahissa [ Sun Jul 18, 2010 20:45:25 ] |
| Post subject: | Speed controllers with LiPo 3.7V |
Hi, I would like to know how are you using your standard ESC with the new LiPo 3.7V batteries. Do you use extra LiPo 7.4V packs or ESC adapted to use 3.7V batteries. All possible information will be very handy. Cheers |
|
| Author: | FOXY923 [ Sun Jul 18, 2010 20:55:53 ] |
| Post subject: | Re: Speed controllers with LiPo 3.7V |
I think most here are using a booster. Like Tekin's TQ Booster or Novak 1 cell booster. Or if you can get a 1 cell esc that would work to. |
|
| Author: | Mini_Me [ Mon Dec 06, 2010 12:34:47 ] |
| Post subject: | Re: Speed controllers with LiPo 3.7V |
Anyone have feedback on the newer escs coming unto the market with built in BEC boosters? |
|
| Author: | Peakki [ Thu Dec 09, 2010 14:28:51 ] |
| Post subject: | Re: Speed controllers with LiPo 3.7V |
| Author: | Mini_Me [ Sat Dec 11, 2010 09:17:48 ] |
| Post subject: | Re: Speed controllers with LiPo 3.7V |
Thanks for the feedback. Went with the Speedpassion. I'm also running 13.5 and I read from LRP own comments that the super/spec stock version with high timing will require a new esc that isn't out yet. The Speedpassion may be big but hopefully not having to run a receiver or booster will equal about the same space used. |
|
| Author: | Mini_Me [ Mon Jan 03, 2011 16:00:38 ] |
| Post subject: | Re: Speed controllers with LiPo 3.7V |
Got the speed passion. And though it works as advertised. It really is a HUGE esc. It also required me to turn off the lipo protection to work with the 1 cell. Go figure. |
|
| Author: | DarrenOakley [ Sat Jan 15, 2011 21:12:55 ] |
| Post subject: | Re: Speed controllers with LiPo 3.7V |
Tekin with 200mah life battery I now use. Works great and clean and tidy without the extra wiring required for a booster |
|
| Author: | Hagberg [ Thu Jan 27, 2011 10:53:00 ] |
| Post subject: | Re: Speed controllers with LiPo 3.7V |
I use the LRP SXX V2 either without the additional RX pack, since the speedo has an internal voltage booster, or I use an LiFe 6.6V 200mah RX pack for some extra runtime. |
|
| Author: | lpittman [ Mon Nov 18, 2013 22:18:52 ] |
| Post subject: | Re: Speed controllers with LiPo 3.7V |
| Author: | Peakki [ Wed Nov 20, 2013 18:12:38 ] |
| Post subject: | Re: Speed controllers with LiPo 3.7V |
| Author: | lpittman [ Wed Nov 20, 2013 23:35:42 ] |
| Post subject: | Re: Speed controllers with LiPo 3.7V |
| Author: | Peakki [ Thu Nov 21, 2013 15:40:13 ] |
| Post subject: | Re: Speed controllers with LiPo 3.7V |
| Author: | lpittman [ Fri Nov 22, 2013 19:41:00 ] |
| Post subject: | Re: Speed controllers with LiPo 3.7V |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|