| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| XRAY XII ------ General forum https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=24&t=8448 |
Page 5 of 5 |
| Author: | swords [ Mon Jan 05, 2009 19:17:52 ] |
| Post subject: | |
Hellow, Like i tell you use 3/32 inch allen screwdriver |
|
| Author: | Hurricane '007 [ Mon Jan 05, 2009 19:54:01 ] |
| Post subject: | |
swords I can't just buy tools over tools... theoretically you would have to buy that load of tools only for the XII: 3mm turnbuckle (8,- Euro - only used for turnbuckle screw at the front) 4mm turnbuckle (8,- - only used for the servo rods) 1,5mm allen wrench (9,-) 2,0mm allen wrench (9,-) 3/32 inch wrench (9,- - only used for the rear wheel screws) 5,5mm socket driver (13,-) and of course a reamer, files, knifes, side cutters, scissors and pliers (together about 40 to 80 Euro depending on the quality) which are used for all kinds of kits. o_0 !! They say it should be a 3mm screw but it isn't, so I am of the opinion they delivered the wrong screws in the kit not that I have to buy all kinds of tools which aren't even mentioned in the list at the second page of the instruction manual. Thanks for telling me which is the right tool, but think about that..... |
|
| Author: | swords [ Mon Jan 05, 2009 21:41:57 ] |
| Post subject: | |
| Author: | Krolleg [ Mon Jan 05, 2009 22:22:17 ] |
| Post subject: | |
| Author: | AMT-Flo(h) [ Mon Jan 05, 2009 22:38:06 ] |
| Post subject: | |
| Author: | Hurricane '007 [ Mon Jan 05, 2009 23:15:12 ] |
| Post subject: | |
| Author: | florianlaux [ Tue Jan 06, 2009 10:58:47 ] |
| Post subject: | |
the screws for the rear wheels are M3 the 2,5mm tool fits perfect. Drove about 20 packs with my XII by now and had no problems. Nothing broken, easy to drive with tons of steering compared to the CRC of a friend, with whom I changed cars for a pack. best thing is the diff - still very smooth.... |
|
| Author: | swords [ Tue Jan 06, 2009 11:37:29 ] |
| Post subject: | |
Hellow, about the car that is as you say perfect. Nice car very good standard Ball Bearings. Everythink is very smooth. Swords, |
|
| Author: | Hurricane '007 [ Tue Jan 06, 2009 15:53:07 ] |
| Post subject: | |
| Author: | Frans H [ Tue Jan 06, 2009 18:59:31 ] |
| Post subject: | |
| Author: | swords [ Tue Jan 06, 2009 19:29:31 ] |
| Post subject: | |
| Author: | brano [ Wed Jan 07, 2009 11:19:43 ] |
| Post subject: | |
| Author: | Hurricane '007 [ Wed Jan 07, 2009 17:25:44 ] |
| Post subject: | |
| Author: | Frans H [ Wed Jan 07, 2009 19:06:50 ] |
| Post subject: | |
| Author: | Frans H [ Sun Jan 18, 2009 22:24:29 ] |
| Post subject: | |
| Author: | swords [ Sun Jan 18, 2009 22:54:50 ] |
| Post subject: | |
| Author: | MickeB [ Fri Jan 30, 2009 17:38:54 ] |
| Post subject: | XII TQ after first EC round in Italy! |
| Author: | babybaby [ Thu Aug 27, 2009 06:26:03 ] |
| Post subject: | |
| Author: | brano [ Thu Aug 27, 2009 12:47:55 ] |
| Post subject: | |
| Author: | babybaby [ Fri Sep 11, 2009 08:13:04 ] |
| Post subject: | |
| Page 5 of 5 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|