| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Clutch issue https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=21&t=9893 |
Page 1 of 1 |
| Author: | trini [ Fri Nov 20, 2009 03:04:10 ] |
| Post subject: | Clutch issue |
| Author: | Delboy [ Fri Nov 20, 2009 10:44:52 ] |
| Post subject: | |
Maybe it's the threads on the flywheel nut. It may be an idea to put a new clutch nut and flywheel nut on at the same time. Another possibility is the clutch spring you are using or the adjustment of the spring nut. Are you running the clutch very loose? ie. less than 0.8 to 1mm thread showing on flywheel nut. The tension on the spring helps to lock the nut on the threads. You could put some locktight on the nut. On our first car (not Xray) it suggested using locktight. However, this has not been necessary with our NT1 car and will make clutch adjustment more difficult so this would be a last option. |
|
| Author: | trini [ Fri Nov 20, 2009 15:56:16 ] |
| Post subject: | |
Thanks Delboy for the suggestion. But I made a small mistake in my wording,:cry: I really meant the clutch bolt, the bolt that holds the whole clutch in place. |
|
| Author: | Delboy [ Fri Nov 20, 2009 21:33:18 ] |
| Post subject: | |
| Author: | trini [ Mon Nov 23, 2009 13:46:22 ] |
| Post subject: | |
Delboy just an update, as you suggested I went back to instruction manual settings and all is well, clutch works great. The issue only seemed to occur when I tried 0.5 Endplay(strange) Thanks |
|
| Author: | Delboy [ Mon Nov 23, 2009 18:21:38 ] |
| Post subject: | |
| Author: | trini [ Mon Nov 23, 2009 19:01:41 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|